How beautiful lace up shoes - original ways

Until recently, the question of how to lace up shoes almost did not bother anyone. This situation has changed with the arrival of bright shoelaces to the fashion world. Such laces, of course, attract the attention of others, so this topic has become very relevant today.

Almost every day we tie shoelaces on our shoes in the way we were taught in childhood. This is the way everyone will call a classic for himself. But there are several types of lacing which are considered to be classic.

To use this type of lacing, you first need to count the number of rows of holes. Shoes with an even amount need to start to lace up the outside, and with an odd one - from the inside of the shoes. The lace should be tucked into the bottom row and the length should be distributed so that the ends are the same. If the ends of the lace at this stage are outside the shoe, then you need to fill it in the hole just outside and vice versa. This is how the sequence of crosses “top-bottom” will turn out. The lace tied up will last much longer.

First, the lace must be threaded through the bottom holes of the shoe, bring the ends out and distribute the length so that they are equal. Next, the ends must be crossed and passed through the following holes to the outside of the boot. Repeat this action is necessary until the lace takes all the free holes. After that, the remaining ends should be tied into a knot and a bow. Such lacing is great for any type of shoe, it does not crush the fabric, but evenly distributes it over the surface of the foot.

Sometimes there are situations in which a person cannot spend a lot of time lacing shoes, but at such a moment it is very important to look neat. In order not to fall into the face of the dirt there are several ways to quickly and easily lacing, which will delight with its originality.

There is such a type of lacing, in which you do not even need to tie the lace to the bow, and the process of creating it will take no more than a minute. At one end of the lace you need to tie a tight knot, the size of which will be larger than the hole in the shoe. Thread it through one upper hole so that the knot is inside the boot. Thread the other end into the opposite upper hole, inside the shoe, then bring it up through the second hole from the top. Continue through the string to the bottom. Thus, we have two rows: the top straight and the bottom slant. Thread the loose end between the resulting rows to the top, tighten and fill up with the bootleg.

The most neat way to lacing shoes can be called a straight lacing. This type is also called internal or hidden lace-up, since only neat bands can be seen from the outside, and the weave of the lace is hidden from the eyes inside the shoe.

This is the simplest type of internal or hidden lacing. The lace must be tucked into the bottom row of holes so that the ends of the lace are inside the shoe. One end should be immediately withdrawn into the upper hole, and the other end up with a “snake” so that all the horizontal lines are on the outside of the boot, and the vertical ones are on the inside. This type is only suitable for shoes with an even number of rows of holes.

This kind of hidden lace-up looks not only very neat, but rather original. It will need a rather long lace. First you need to fill the string in the bottom holes so that the ends are outside. Distribute the length of the lace into equal parts. Next, you need to fill each end in the hole located above it.Cross the ends inside the shoe and insert them into diagonally opposite holes. Shoelace go out through the same holes, through which were tucked inside. Continue the lacing in the same way to the top. This is a very durable type of lacing, but it is quite difficult to tighten it on the leg.

For sports you need special clothes and shoes. Few people know that, for the convenience of athletes, there is also a special kind of lace-up sneakers and sneakers.

This type of lacing is widespread among the European military. It is very convenient because the pressure from the tension of the laces falls mainly on the thick fabric around the holes.

Lace must be inserted from the inside of the shoe out into the bottom row of holes and distribute the length into equal parts. Then you need to thread each end into the hole above the one from which it is drawn on top of the shoe inward. Next, you need to cross the ends and thread them from the inside to the outside. The ends that came to the top again, you need to skip inside the shoe like the first time. Continue the process until the end of the holes. This type of lacing will appeal to lovers of jogging and other active sports.

This type of lacing is good for cycling so that the laces will not cling to the bike and will not get tangled. First of all, the lace must be inserted into the bottom row of holes, so that the ends are outside the shoe. Thread one end into the hole located above it inward. Then this end from the inside out into the hole on the opposite side. The other must be tucked into the hole located above the first end of the lace inside the shoe. After that, put it in the hole on the opposite side to the outside. Further, the principle of lacing is simple: if the lace is inside the shoe, it must be brought out into the opposite hole; if the cord is outside - it needs to be threaded through a hole located one upwards.

Everyone who asks a question about how to lacing shoes, seeks to find for themselves the most unusual of them. Further, the methods are collected for the patient, because such a lace-up is rather difficult to perform.

This type of lacing is perfect for lovers of tight-fitting shoes. It will add strength to the laces and extend their life. It is necessary to start lacing as a traditional lacing, but at the stage of crossing the lace you need to create an imitation node. Since the cord will not tighten into the knot, but will refuel into the next holes - it will weave into the likeness of one more durable thread.

Very beautiful and very strong type of lacing, externally resembling a zipper. It is ideal for skates, rollers and sports shoes. The lace must be tucked into the bottom row of holes and distribute the ends so that they are equal. Then skip both ends of the lace from the bottom upwards under the “bridge” that has formed inside the boot. Next you need to cross the laces and fill the next row of holes from the inside of the shoe to the outside. Both ends need to be threaded under the lace of the hole from which they are released, again to cross and fill the inside of the shoe. Repeat these steps to the top.

Very original type of shoe lacing. In order to lace up shoes in this way, it is necessary to pass a string through the bottom holes from inside the boot, pull the ends out and distribute the length so that the ends are equal. The ends must be crossed, twist one around the other 2 times, so that the spiral comes out and pass it through the following holes from the inside of the boot to the outside. Repeat until the lace occupies all loose holes. Looks better, made of thick white laces, on dark shoes.

With the help of such lacing, you can significantly decorate the shoes of an adult, and the child’s shoes will become special and unique.

For this method, you will need two pairs of identical laces, but of different colors, for example: white and black.First of all, you need to take one white and one black lace and sew them so that there is no too thick layer or knot. To do this, it is better to cut the caps on one side of each shoe so that they do not rub their feet. The finished two-color cord should be inserted into the shoe so that the junction of colors would be hidden. You can lace up in any known way.

For this method, you will need two laces for each shoe. First insert the bottom holes from the inside of the boot out and distribute the ends so that they are equal. The same should be repeated with the second one, but it should be inserted into the second row from the bottom. First cross over and skip it in the third bottom row of holes from the inside of the shoe to the outside. Thread the second cord in the same way into the next free row. At the top there are four free ends for lacing. Here you can show imagination: tie two bows horizontally or vertically or tie one bow from all ends.

This type is suitable only for shoes with a wide field for lacing. It is better to choose flat and tight laces. The first lace should be threaded in a simple, straightforward way. The second is to be passed through vertically passing alternately below and above the dark row. This is a very original way, but very impractical. To lace up shoes in such a way is quite difficult, it takes a lot of time, besides, the pattern is deformed with each removal or shoeing.

“All ingenious is simple” - this saying is very suitable for the following method of shoe lacing. For her, you will need two pairs of flat colored laces. It is enough to put one shoelace over another and lace it in any known way. Choosing laces, you should opt for thinner and flat ones. Thick laces will create a dense layer, it will be difficult to thread through the holes and not keep well in the knot.

For this type of lacing, any laces are suitable, but the most original look will be round. Laces of different colors need to be sewn and threaded into the bottom row of holes so that the junction of colors is exactly in the middle. Then continue to lace up, as in the case of the traditional, but each crossing to twist the laces once so that the ends are back in the direction from which they are coming. This type of lacing is not practical, as the pattern is shifted.

Choosing a new pair of shoes, we want it to be comfortable. In shoes with lacing, the lace plays an important role, because it is incorrectly knotted, it can spoil the feeling of wearing even the best pair.

The choice of the type of lacing should be approached as the choice of attire: sports shoes involve the use of lacing for sports, and elegant shoes - complex and unusual.

1. The lace should be easy to loosen and tighten.

2. The ends should not be too long.

3. Lacing should evenly distribute the tension of the lace across its entire height.

Under these criteria, classical types of lacing are best suited.