Bracelet Stand

Each woman of fashion has in the arsenal the wide range of various accessories which periodically replenishes with new copies. And, in the end, there comes a time when you have to think about the place of their storage. If chains and earrings can easily fit into a sophisticated casket on the ladies' table, then the case with bracelets is a bit more complicated, since many of them have rather large dimensions, a rigid base and a heavy mass.

A significant help in the matter of cozy placement and storage of jewelry data can provide a stand for bracelets. Shop windows of jewelry stores offers a wide range of such supports, differing in shape, color and original idea. But by following the trendy “hand made” flow, you can make such a device yourself at home. The article will discuss some of the supports for bracelets made by hand, which will not only serve as a case for them, but also harmoniously fit into the overall design of the room.

For the manufacture of this stand, you must have basic skills in working with wood or plywood.

• First you need to draw yourself elegant silhouette of the bust. Its size and shape are completely dependent on the flight of fancy and your creative abilities.
• Transfer the contour of this silhouette from paper to a wooden base or piece of plywood, and then cut it with an electric jigsaw or saw. If the tree allows, you can create volumetric forms with chisel and sand it with emery paper.
• Paint the resulting layout with varnish or acrylic paint in a color suitable for the interior of the room.
• Install a special hardware for the stability of the stand on the table top or hanging on the wall.
• Hammer in small carnations and jewelry hooks and enjoy the result.

Unusual stand made of twigs of wood decorate the room and collect all the decorations in one place.

• Prepare a suitable sprig of a tree or shrub, cutting off excess parts and peeling off the upper bark.
• Make a hole in a small wooden or plywood plank-stand and fix the prepared branch in it.
• To paint (it is better to use a spray) or varnish and let dry.
• Put the "miracle tree" in a prominent place and hang bracelets on it.

The main material for this stand are things that are usually disposed of as garbage.

• Wide tape to connect several sleeves from toilet paper into a single pipe.
• Attach a longer sleeve of food film or foil as a stand to make a “T-shaped” shape. With this task perfectly cope glue gun.
• From the old discs create a base, gluing them together.
• Cardboard construction to glue with velveteen or other beautiful material.
• Connect the stand and base with hot glue.
• Decorate the junction of the parts.

To create a stand in the form of a stand, you need to take a wooden or plastic tray for cutlery and decorate the bottom. For this purpose, you can use paint in cans, “decoupage” technique, or simply paint with bright colors. Such a stand with a black velvet paper sealed with a bottom looks particularly impressive.

The prepared stand should be mounted vertically on the wall, having previously inserted various decorated carnations and hooks for hanging the bracelets into it. You can also simply place it horizontally on a tabletop or in a drawer, then hooks are not needed, and the instrument compartments will serve as compartments for decorations.

The basis for this stand will serve as a pair of tea or individual mugs and saucers that need to be interconnected with hot glue in a kind of pyramid. The decorative pillows pasted to the saucers look very elegant, to which bracelets are attached with the help of safety pins.

The original stand for bracelets can be created from a wooden clothes hanger with a lot of small studs driven into it. Such a composition is fixed on the wall and can place on itself not only bracelets, but also other decorations.

The stand in the shape of a hand is very popular in jewelry stores and showrooms and serves as a rather extravagant decoration for a home interior.

• Cut out the plywood base for the future stand in the form of a square, circle, etc.
• Draw a circle at the base equal to the diameter of the wrist of a rubber glove, from which the layout of the hand will be created and cut it with the help of a plumbing tool.
• Attach a glove to the base with a construction stapler.
• Mix gypsum with warm water until a creamy consistency is obtained.
• Carefully pour this solution inside the glove.
• Secure the base so that the glove hangs calmly in the air, and leave the whole structure for several days until the gypsum is completely dry.
• Remove the glove from the resulting hand and set the wristband stand on the ladies' table.

Such a stand is made of a small wheel, for example, from a pram.

• Remove the wheel, remove the rubber cover from it, attach with a set of small hooks, paint it with the paint of the desired color.
• Secure the wheel with a stick or metal rod to any suitable base.
• Decorate the joints and hang bracelets.

This element stand is very easily and quickly manufactured, elementarily used, but at the same time it can accommodate a lot of different bracelets.

• Take a beautiful box of dense material. You can decorate it yourself, clinging the inside with bright cardboard or a collage of photos.
• Put the box on one side, the inner part to itself.
• At the same distance make oblique cuts along the edges of the box.
• Insert into these cuts the sticks in such a way that they are fastened horizontally and parallel to each other. For this purpose, fit any knitting needles or sticks for rolls and sushi.
• Fasten the stand to the wall so that it does not topple forward under the weight of the bracelets.
• Hang bracelets on these sticks like "birds on the wire."