Why gel nail polish blistering?

Modern technologies allow you to make a manicure, the most resistant to mechanical damage. The gel lacquer coating procedure allows you to maintain durability and lasting color from two to three weeks. For longer use, correction will be needed.

Beginners often face problems when gel lacquer blisters on the nails. Sometimes this unpleasant moment can happen with pros. Let's look at the reasons for the formation of bubbles.

Carefully read the instructions for each tool and follow these rules.

1. Most often, defects appear if the reagents are handled improperly during application.. One of the reasons is shaking the bottle before application. Some carry out such a procedure by analogy with the usual varnish. From this, the uniform consistency is disturbed and air bubbles enter the liquid, which appear after drying. It will be right to hold the bubble in a warm place or in your hands, until the composition becomes uniform.
2. Pay special attention to the degreasing of the nail plates, as the remains of the cream and other components interfere with the uniform coating of the base. When it dries, such places are blown up. The base must be of high quality, because it protects your nails from the effects of harmful components in the composition of varnishes.
3. Any master knows that two layers of varnish are enough for color saturation.. Some girls think that the more layers the better. This is not quite true. It is known that the faster the coating dries, the longer it will last. The multi-layered design looks rude and has all the chances to blister during the final drying or fall off in the first week of wearing.
4. You risk to spoil the manicure when applied, if the nail plates have moisture droplets. To avoid such misunderstandings, it is worth using a special substance - a primer, which reliably degreases the surface. Make sure that all existing components are in sealed packages, because quite a small drop of water and varnish will be damaged.
5. Do not cover the nails with gel polish immediately after a shower, bath, sauna or swimming pool.. Nail plates absorb a lot of water that even a primer cannot force out. This gel will not last long and will swell in the first week.
6. For high-quality performance of work and the worthy end result it is worth using a basis, a varnish, a primer and other components of the same manufacturer. Tools from different manufacturers may not be compatible with each other. You should not buy cheap copies, their quality is questionable and can lead to fragility.
7. Keep all components right. On the jars should not get direct sunlight, the room should be cool.

Drying must be done as carefully. There are a number of rules that must be followed to ensure that the process is correct.

1. Do not blow dry your nails or any other source of hot air, keep it under cold water, swing your arms. The composition of the gel polish is not designed for such treatment and its structure will be destroyed under the action of temperature difference.
2. Bubbles may appear when a lamp malfunctions.. Try to replace the source of ultraviolet radiation.
3. After the final procedure, the manicure needs about another hour for complete drying., since the deep layers are still soft.At this time, refrain from coffee and tea, a hot cup can cause a violation of integrity due to temperature changes. You should not contact with water and other chemicals: do not wash the dishes, do not blow-dry the hair, do not do the styling.
4. Using express-drying, check whether it is suitable for other components.. Do not use varieties designed for the quick drying of ordinary varnish.
5. Always use a fixer. It must be of the same manufacturer as the other components or compatible with those. After applying it, the surface will become glossy and last longer.

Having transformed the tips of our fingers, we want this beauty to remain as long as possible in its original form. This is easily achieved by following some guidelines.

1. Minimize contact with chemicals. Do household chores with rubber gloves. This will protect not only your varnish, but also the skin of your pens from the negative effects of synthetic detergents.
2. In the first couple of days try to refrain from trips to the sauna, swimming pool, water park, otherwise, it will affect the strength of the gel.
3. Do not apply gel polish if the nails are damaged, brittle and require special care.. First, restore them to a healthy state, and then proceed to the experiments.
4. Make timely correction. ABOUTIt will help to preserve the aesthetic appearance and protect the nail plates from accidental injury.
5. Do not wear a coat for more than two months.. After this time, take a break so that the nails can relax and improve their health. During this period, do baths, masks with oils and other useful procedures.

If the defects manifest themselves, and the time to redo everything is sorely lacking, You can resort to some tricks.

1. The most affordable way to decorate the nails with special stickersand, rhinestones, beads or other similar accessories. They will add zest and hide small flaws. It will look spectacular 3D applique in the form of flowers or butterflies, depending on the source color.
2. Embossing will be more difficult.that will help mask the problem areas.
3. You can use special tools which allow to eliminate bubbles without removing the entire varnish. Their principle of operation is based on dissolving the upper damaged layer and leveling the subsequent lower ones. Such proofreaders can be purchased in specialized stores, guided by the advice of sales assistants.

In this case, you should try to carefully polish the surface of the plates with a special nail file. Proper preparation for application almost always guarantees a result without defects.

1. Buying a product from a new manufacturer, be sure to test for its durability, speed of drying and other important points. After examining all the properties of varnish, you can avoid unpleasant flaws, such as bloating, cracks and small bubbles.
2. Conducting coverage at home, always keep the ingredients fresh, store them in the right place, avoid any contact with water until completely dry.
3. Apply the product should be as thin as possible., tightly pressing the brush to the nail plate. Make sure the brush is not too tight. Never rinse with water.
4. Do not use formulations that have expired.. They may have a normal thickness and fit well, but the effect of their application will be less. In addition, the risk of nail damage to the individual components of the lacquer increases.

Techniques for applying varnish - in the next video.