Gel Polish Removers

Now at the peak of popularity is a manicure using gel polish. There are many styles and techniques of creating real works of art on the nails using these tools. But it is equally important to qualitatively remove the gel polish. Therefore, for this purpose also produced a lot of fixtures. The conversation today is dedicated to this actual topic.

There are many different tools for cleansing the nail plate from gel polish. It is better to remove it with the use of a special solution created specifically for this purpose, since the usual means containing acetone does not cope with this task properly.

• It happens that the process of releasing the nail plate from a layer of gel polish delivers a lot of difficulties. To facilitate this action, you can apply a single layer of ordinary colorless varnish on the nail before applying the gel. This technique will greatly facilitate the procedure of cleansing the nail from the artificial surface.

• Another wayIt helps to remove gel polish without any extra effort - it is polishing of the outer glossy layer. Choose a special tool for this task, for example a file with an abrasiveness of 100/180 grit.

• Another gel polish removal method - This is a special foil sponzhiki. They must be thoroughly moistened with a Remover and applied to the nail. To secure the sponge finger wrapped with foil. Remove it from the nail plate should be in 15 minutes.

• Another option is to remove gel manicure using ORLY Gel Fx sponge, Gel & Glitter NailLacquer Pocket Removers. In a plastic pocket with a sponge you need to pour the nail polish remover. Next, you need to attach a finger to it and wait 15 minutes.

• An equally effective method of removing the gel coating from the nail was developed by the company ruNail. She presented sets of reusable caps (fingertips). They are plastic and silicone, similar to pegs or clips. In this cap it is necessary to pour liquid for removal of gel varnish. In a small hole, which is located on the surface of the cap, you need to insert a finger. Next, the cap must be closed and wait 15 minutes.

• Gel manicure perfectly removed in the bath for soaking. This is a kind of container with 5 niches, in each of which the finger should be immersed. The bathtub is filled with a remuver. The duration of the procedure is not more than 15 minutes.

• Another method of removing the gel coating is soaking it with the special cotton winding CND "ShellacRemover Wraps". During the procedure, the substance that removes the lacquer has no contact with the skin and acts exclusively on the surface of the nail. Thanks to the perforated structure, the fabric does not create a "greenhouse effect". The procedure lasts 15 minutes.

To treat the cuticle, use the oil "Entity One Cuticle Oil". It nourishes and moisturizes the cuticle, and also helps to prevent dryness after processing the nail plate with a remuver.

Of course, the manicurist chooses the tools and method to remove the gel coating. This choice is influenced by his personal preferences, experience, knowledge of the methodology and the quality of the materials with which he has to work.

Manicure master for high-quality work, corresponding to his professional level, you must have more complex equipment that would provide a much faster application and removal of lacquer coating. One of the most popular developments in this field of cosmetic art is the mill.

In order for the cutter to work for a long time without technical failures, you need not skimp when choosing a model. It is advisable to purchase one that will not overheat at increased speeds. From the quality of the device depends on the future type of nails.

To cutter served you for a long time without breakage, pay attention to what it is made of material.

• Steel cutters designed to cut a rough layer of skin that grows around the nail plate. For this purpose, use a small ball nozzle.

• Ceramic Mill designed for intensive treatment of the cuticle. Oval and cylindrical corundum tips are well suited for this. With their help, you can treat the nail without fear of allergic reactions or microdamages.

• Carbide cutters used by manicurists for the care of artificial nails. It is not necessary to use them for processing natural nails, as this can cause tissue damage.

• For the correction of acrylic nails use a diamond cutter. It helps to get rid of the cuticle and give the desired shape of the nail.

• Polishing mills are of two types: cotton and silicone. They are used at the final stage of the procedure for the correction of nail plates.

In order to apply one of the attachments, you need to buy a machine to which they must be attached. After selecting and installing the nozzle, you can immediately begin to remove the coating without making pre-treatment of the nail.

After processing the nail prastiiny frezoy need to clean the nail from the small particles and dust. It is recommended to put on it any nutrient: oil or cream. This contributes to the rapid regeneration of the keratin layer and has a general healing effect.

Using a device for treating nails, such as a milling cutter, you can quickly and without damaging the nail plate remove the gel coat. Confirmed by numerous reviews.

How to remove the gel polish mill, see the next video.

As a result of improper application of the gel coating, it begins to detach in the area of ​​the cuticle. This can happen if the manicurist did not sufficiently degrease the nail before applying the varnish. Many girls independently tear it off. This is wrong, as the gel during application to the nail plate fills even the smallest cracks, so a rough removal of varnish will cause a minor scratch to turn into deep damage. Abrasion at the base of the nail is not only unaesthetic, but also painful.

To avoid the unpleasant consequences of self-removing the gel, use the advice on how to easily and economically remove the gel coat from the nail surface by yourself.

For this we need:

1. cotton sponzhiki;
2. varnish remover with acetone;
3. nail file;
4. cream or vaseline;
5. foil.

Working process:

1. Cut out sponge figures in the shape of your nailsso that acetone does not interact with the skin.
2. Saw off as much of the gel as possible. This will help the acetone to penetrate deeper into the thickness of the varnish, which will help to significantly reduce the time of the procedure.
3. Apply to the skin around the nail cream or cosmetic petroleum jelly. This will protect your finger from the effects of acetone.
4. Moisten the sponges with nail polish remover, attach them to the nails and secure with foil - so the liquid will not evaporate.
5. Wait 20 minutes.
6. Remove the foil with the pad, it should remain the entire gel polish. If this does not happen, then try to hook the gel coat with an orange stick. If this did not help, then repeat the whole manipulation again.
7. After the shellac is completely removed, the appearance of your nails may scare you. No need to worry, just treat the nail and cuticle with softening oil. It can be freely purchased at cosmetics stores. If this oil is not, then you can use any other. The result, of course, will not be impressive, but if you handle the nails a few more times, they will shine like nothing has happened.

How to remove the gel polish at home, see the following video.

• The first way is to use butter. The less fat on the nails, the longer the lacquer will hold, so before applying the gel coating in the salon the nail plate is treated with a drying agent. If you do not carry out this stage and cover the nail with oil before applying gel polish, then later it will be much easier to remove. But this method has a drawback - the manicure will be fragile.

• The second way is to use the base layer.. The procedure for removing the gel is much easier if before applying it the nail is covered with a base coat, a special tool designed specifically for this purpose. It will protect the nail plate, but significantly reduce the time until the manicure is preserved in its original form.