Shaving with a straight razor

It is widely believed that shaving with the help of the so-called fear has already become a thing of the past, because today we can get a completely safe and, moreover, quite sharp machine. However, many men may not agree with this opinion.

A royal shave, the so-called bristle removal procedure with a razor-knife, is still very popular due to its effectiveness.

The peculiarity of shaving with the use of so-called danger, that is, reusable razor bladeI, which resembles a wide folding knife, is a thorough preliminary preparation and adherence to technology. As a result - perfectly smooth and clean skin without any consequences.

Also an important detail is that shaving with a dangerous blade involves an extremely wet technique. It involves the initial hygienic preparation of the face before the main procedure. Ideally, it is performed immediately after taking a shower.

Simple steaming and moisturizing can actually be much more effective than using all sorts of gels. The main problem is that most manufacturers of gels and shaving foams promise a high-quality result that cannot be guaranteed. In the end, the result of shaving depends largely on the preparation and quality of the blades. That is why dry technique is usually accompanied by excessive dryness of the skin, the appearance of various irritations, inflammations and rashes, as well as minor cuts.

Another Wet Preparation Option - soak a towel in hot water and then wrap the face with it for 5-10 minutes. After that, you can start shaving using a three-blade machine, but the most reusable straight razor will be most effective.

Known to many "fear" with proper treatment is a very impressive men's accessory. Due to the length and shape of the blade, 1-2 passes of the razor over the skin area are enough to completely remove the hairs from it. In addition, any further irritation of the epidermis is excluded, and no extra effort is required to remove the hair.

For wet shaving with a dangerous blade, only a long beard is difficult. The fact is that long hair can be pulled out with a blade, because of which the procedure can be very painful. Such a problem is solved by pre-cutting the beard.

Of course, an important role, above all, is played by the quality of the fear itself. Today, they can be purchased only in specialized stores and retail outlets, which in itself can act as a guarantor of quality. However, the market has a fairly large selection of blades in which you can easily get lost.

German manufacturers are always very popular. Companies such as Boker, Dovo and Hubert, as well as Robert Klaas are particularly well known. Immediately it is worth preparing for serious expenses, because a good razor knife costs much more than a usual machine with interchangeable blades.

In order not to lose the quality, pay attention to the following details:

1. The material from which the blade itself is made. The benchmark is considered quality stainless steel or carbon steel.In this case, you have to choose between comfort during shaving and the life of the blade. The fact is that carbon steel provides the most efficient hair removal without damaging the epidermis, but it will deteriorate and dull much faster than stainless steel;
2. Handle material. Of course, this factor plays no role in terms of the effectiveness of the procedures. However, it is much more comfortable to shave the face when the machine is comfortable in the hand. Experienced men talk about the hilt of danger as a setting. Today, in stores you can find options for handles made of plastic, steel, wood or even ivory;
3. Be sure to pay attention to form! The best men's shaving blades have a slightly concave shape, making them easier to adapt to irregularities on the face. If the razor has a completely flat and straight blade, then it is better to abandon it immediately!
4. It plays an important role stigma. On a good and high-quality product, the manufacturer's logo will be applied by engraving directly on the blade itself. If the stamp is painted or even placed on the handle, this is a sign of poor quality;
5. Study blade thickness. The butt, as well as the sharpened part, must not only be thin, but equal to each other;
6. You should also pay attention to construction. Classic reliable fear is made of one or two components. If the blade folds into the handle, it rotates and is held at the base by two rivets. The presence of any springs and mechanical parts is considered a bad sign;
7. Sharpening. When choosing a blade, this parameter is most important for shaving efficiency. The degree of sharpening ensures not only easy removal of hairs from the face, but also long-term operation of the blade and the possibility of re-sharpening it over time.

Unlike standard shaving, wet technology using danger will require you to purchase some additional accessories. One of the most important, besides the most dangerous razor is shaving brush.

The shaving brush is a thick brush with a short handle. It is necessary not only for applying foam on the face, but also for beating it. That is why it is important to pay attention to the quality and material of which the brush itself is made.

To date, there is a fairly large selection of all kinds of small brushes. The brush can be made of synthetic, which is the most simple and affordable option, as well as horsehair, boar bristle, badger hair or squirrels.

Using a high-quality shaving brush allows you to whip a very thick and dense powder.Well. Unlike various ready-made shaving foams, which are sold in tubes or cans, this product moisturizes the skin much better. In addition, the foam retains heat, which is very important for wet shaving. During the application of foam, the process of exfoliation of dead cells of the dermis occurs, which is very useful for the skin, and the risk of irritation and cuts is significantly reduced.

In addition to a shaving brush, soap or cream, as well as a bowl for foaming, you will need a dense towel. It should be soaked in hot water, pressed, and then wrap the face for 5-10 minutes immediately before the procedure. This method of preparing the skin of the face in combination with a dense foam, obtained with a brush, ensures the most effective and comfortable shave.

Mastering the royal shave, and that is how it is often called the procedure with the use of fear, is not so difficult. Of course, each experienced barber has his own favorite technique, but for home shaving it will be enough to master the general principles that will help to achieve an effective result and at the same time avoid mistakes. There are only five basic steps:

1. After all the preparations, start on one side of the face., for example, on the right. To do this, the left hand is best to tighten the skin of the cheeks, so that the blade slid much easier. Cut the hair in the direction of their growth, keeping the caution at an angle of 30 degrees and without any additional pressure and effort. Too large or small angle of inclination of the blade can cause skin cuts, and if you try to shave against the growth of hair, you can face the problem of their ingrowth in the future. Also do not forget to wash off the remnants of foam from the blade so that it does not dry out.
2. The left side of the face will be harder to handlem, because it requires a change of working hands. If you know that you do not have enough skill, it is better not to change your hand, but simply to tighten the skin near the ear and shave the hair from top to bottom, while holding the caution so that you can see the location of its top for better control. At the same time, as the blade itself will fall, the fingers of the free hand also fall below and tighten the skin for better sliding. At the end of shaving the cheeks, you must continue to move to remove hair from the neck and beard.
3. When shaving the area above the upper lip it is necessary to pull it down as much as possible.
4. Shaving chin area just pull the bottom lip up. In this case, the movement should be made from top to bottom along the growth of hair.
5. The area under the chin - the most difficult and requires a delicate approach, because the skin is very thin. It is best to tilt the head back a little and strain the muscles of the face, while the left hand pulling the skin down and straightening it. For greater efficiency of shaving in this area it is necessary to hold the blade first along the hairline and then against it. Beginners are advised to simply repeat the movement of the blade along the hairline several times.

Some men may become confused when confronted with a whole list of necessary shaving sequences. For this you need to train, but do not forget about the general recommendations:

• Immediately decide on the type of blade grip and practice it. There is the so-called "canonical" type of grip "fears", in which the cutting edge is always held in a position up or down. You can also use free grip, at which you need to independently determine the location of the blade that is convenient for you;
• It is important to practice keeping the razor., feel its weight and inertia. During the shaving procedure, the arm should be almost completely relaxed;
• Sometimes it may take several passes of the blade.. Do not forget to rinse your face with warm water after each time, and then re-apply a dense layer of foam;
• Periodically rinse with water."To prevent the foam and hair from drying out on the surface of the cutting edge;
• Finish the procedure with mandatory treatment of the skin. First rinse it with cold water and then apply a gel or lotion that will soften the skin and prevent inflammation;

Much has been said about the positive aspects of dangerous shaving. Hair removal is very effective and smooth, the risk of irritation and inflammation is reduced, and the procedure itself, with proper skill, takes only 4-5 minutes.

Of course, there are also disadvantages. Among them, the following nuances should be especially noted:

• Wet shaving is more expensiverather than the classic dry. For example, a one-time machine will cost only 10-15 rubles, but a quality razor will cost about $ 100-200, not to mention the separate purchase of a good shaving brush or a whole set. On the other hand, an expensive dangerous shaving kit will last a very long time.
• The name of the razor itself suggests that royal shaving is not a joke. In the absence of any preparation or a fundamentally wrong approach to the procedure, a serious cut can be easily achieved.
• As a result: requires special preparationand and skill.
• Unlike dry shaving machine for such a procedure you need a suitable place, you will definitely need a mirror and hot water.

The only thing that stops many men from acquiring dangerous shaves is the price and the need for certain skills. Representatives of the stronger sex, who decided to try on themselves the charms of this royal shave will never return to the traditional machines.

When using “fear” the skin becomes absolutely smooth, the shaving process proceeds completely painlessly and impresses with its effectiveness. This method of removing hair from the face is recommended by many men who already have extensive experience in caring for their appearance.

Royal shaving with a straight razor is in the next video.